Home › Products › CPS-FCE-C
CPS-FCE-C

More Views

CPS-FCE-C

Clippard CPS series pressure sensors are conditioned and offer a customized calibration around your application requirements, allowing for a full scale accuracy of 0.25% over the calibrated range. They can be used in conjunction with Clippard's Cordis pressure controller or as a standalone transducer.

Estimated to ship within 30 business days
Quantities and lead times are changing daily due to supply chain challenges. We appreciate your patience and understanding.
Contact your local Clippard Distributor for volume discounts.
  • Standalone or use in conjunction with Cordis Pressure Controls
  • Downstream sensor feedback
  • Multiple VDC signal outputs
  • Static or dynamic applications
  • Multiple electrical connection options
  • Customizable pressure ranges and mounting options
  • IP65 Protection Rating

Mounting options available are Male 1/8" NPT, Male 1/8" BSPT, 7/16-20 UNF face seal and manifold mount. These allow the user to place the sensor downstream or in a remote location from the pressure controller. This creates a quicker response and helps avoid any lag in the system.

The manifold mount lends itself well to analytical value-added assemblies. All wetted materials are oxygen compatible and manifold mounting eliminates any possible contamination during assembly.

2D DrawingsFile
AccessoriesM8 Female Mating Connector Accessory Cable, 36" (914 mm): CPSH-C1
Accuracy±0.25% of Full Scale
Applications FormApplications Form
Calibrated Range0 to 15 psig
ConnectionM8 Male 3-Pin
Current Draw<20 mA (sensor only)
Data SheetData Sheet
Linearity±0.25% BFSL
MediumClean, dry, non-corrosive gases
Mounting AttitudeAny
Operating InstructionsOperating Instructions
Operating Temperature Range32 to 158°F (0 to 70°C)
Product Line BrochureCordis Electronic Controls
Protection RatingIP65
Protection RatingIP65
Response Time<5 ms
Sensor MountingMale 1/8" NPT
Signal Output0 to 10 VDC
Get CAD files:

Knowledge Base

Videos