Clippard PB-30 Adapter Installation Instructions
Category:
1. Insert actuator into hole in panel
2. Thread panel locking nut onto actuator
3. Align actuator, tighten up to panel
4. Insert swivel adapter into hole in housing
5. Slide spacers onto thread of valve (if needed)
6. Thread valve onto swivel adapter
7. Thread housing onto button
8. Align as needed, tighten all connections
| Clippard Valve | Spacer |
| MAV-2, MAV-2P, MAV-2R, MAV-3R, MAV-3, MAV-3P | None |
| MAVO-2, MAVO-3 | None |
| MJV-2, MJV-3, MJVO-2, MJVO-3 | 1/8" |
| MAV-4, MAV-4D, MJV-4, MJV-4D | None |
| FV-3, FV-3P, FV-3D, FV-3DP | 1/8" |
| FV-4, FV-4P, FV-4D, FV-4DP | 1/8" |
| FV-5, FV-5P, FV-5D, FV-5DP | 1/8" |
